mean well switching power supply iso - 9001 certified manufacturer mwp - 602(a) (53020) mwp - 606(a) .low cost, high reliability .compact size, light weight .105 o c output capacitor .100% full load burn - in test .international ac input range .output voltage correction led .built in emi filter, low ripple noise .high efficiency, low working temperature .soft - start circuit, limiting ac surge current .short circuit, overload protected model specification mwp - 602/mwp - 602a/(53020) mwp - 606/mwp - 606a ch1 ch2 ch3 ch1 ch2 ch3 dc output voltage 5v 12v - 5v 5v 12v - 5v output v. tolerance 2% 8% 10% 2% 8% 10% output rated current 15a 2a 1a 15a 2a 1a output current range 3 - 15a 0.2 - 3a 0.1 - 1a 3 - 15a 0.2 - 4a 0.1 - 1a ripple & noise 50mvp - p 120mvp - p 60mvp - p 50mvp - p 120mvp - p 60mvp - p line regulation 0.5% 1% 1% 0.5% 1% 1% load regulation 1% 6% 8% 1% 6% 8% dc output power 104w 104w efficiency 75% 75% dc voltage adj. ch1:4.7~5.8vref. ch1:4.75~5.5vref. input voltage range 88 ~ 132vac / 176 ~ 264vac selected by switch 47 ~ 63hz; 240 ~ 370vdc ac current 2.6a/115v 1.3 a/230v inrush current cold start 20 a/115v 40 a/230v leakage current <0.5ma/240vac overload protection 105% ~ 150% type:foldback current shutdown reset:re - power on over voltage protection ---------- operating display 602a, 606a double color led correct range:green(5~5.4vref.) wrong range:red temp. coefficient 0.05% / o c (0 ~ 50 o c) on +5v output setup, rise, hold up time 200ms, 50ms, 16ms vibration 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each axes withstand voltage i/p - o/p:1.5kvac i/p - fg:1.5kvac o/p - fg:0.5kvac isolation resistance i/p - o/p, i/p - fg, o/p - fg:500vdc / 100m ohms working temp., humidity - 10 o c ~ +60 o c(refer to output derating curve), 20% ~ 90% rh storage temp., humidity - 20 o c ~ +85 o c, 10% ~ 95% rh dimension 180 * 110 * 50 mm case:602 203*115*50mm with terminal & fixed iron weight 0.9kgs safety standards meet ul1012 requirement (not apply for the mark) ul1950, tuv en60950 approved emc standards --------- cispr22 (en55022) class b, iec801 - 2,3,4, iec555 - 2 verification note : 1.all parameters are specified at 230vac input, rated load, 25 o c 70% rh. ambient. 2.tolerance g include set up tolerance, line regulation, load regulation. 3.ripple & noise are measured at 20mhz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.line regulation is measured from low line to high line at rated load. 5.load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. 6.each output provide up to maximum current, but total load can not exceed max. output power. jun.09.98
|
